Three tanks copper and aluminum parts hydrocarbon cleaning machine

A, three tanks copper and aluminum parts hydrocarbon cleaning machine use

Overlapping non-detachable or complex shape of the parts. There are deep holes, blind holes, thin and small heat capacity of copper and aluminum parts. Suitable for the surface needs of anti-oxidation parts batch cleaning production needs.

Second, the advantages of the three-slot copper and aluminum parts hydrocarbon cleaning machine

1, the cleaning process without water.

2, environmental protection: Pro 0 emissions, can be naturally degraded.

3, low loss: about 0.8L / h (depending on the workpiece) 

4, hydrocarbon recycling, recovery rate up to 99%.

5、Low energy consumption: relative to ordinary water-based cleaning machine power saving 50%.

6、High cleanliness of cleaning products, good dryness and consistent color.

Third, the characteristics of the three-slot copper and aluminum parts hydrocarbon cleaning machine

1、Integrated design, greatly for the transportation, installation, commissioning to provide convenient.

2、With vacuum degassing device, effectively remove the saturated gas in the liquid, enhance the ultrasonic cleaning ability of the oil and ash on the surface of the parts.

3、With washing and throwing function, which can add guarantee for parts to be thoroughly cleaned.

4, vacuum decompression can suck out the blind hole, slit and the gas between the superimposed parts, so that the ultrasonic wave in the state of decompression to produce amazing cleaning effect.

5, built-in distillation regeneration recovery function, can efficiently recover the cleaning fluid, reduce the amount of loss, reduce the use of low cost, to ensure the cleanliness of the cleaning fluid.

6、The whole process of steam maintenance and drying is carried out in the vacuum decompression chamber, which is safer to use.

7、Using explosion-proof accessories and hydrocarbon indirect heating system, adding double insurance for safe use.

8、Configuration of automatic fire extinguishing device, multiple induction and spraying points for safe production escort.

9、Human-machine communication control interface, the working process can be monitored and adjusted.

Four, three tanks of copper and aluminum parts hydrocarbon cleaning machine applications

Jinbang Honors and Qualifications